Table of Contents
Advertisement
FADER
·Cl
58
~
ENAIL!
EO]
ETIJ
1
2
3
4
5
6
7
Dual Matrix Output Module
This module allows the creation of composite mixes of an External input, the Group
and main mix L, R & MONO output signals.
The module comprises two
independent, but functionally identical sections which may be fitted on the far right
hand side of the console where spare module spaces are available.
External Receive
1
There is an EXTERNAL (EXT) recieve level control for a balanced, line level
external input. The input has internal jumpers to select +4dBu/-lOdBV nominal
input level.
Mix Receive
2
Three controls set the lcvelofthe main post-fade Mix signals L, R, and MONO.
Group Receive
3
Eight controls set the level of the post-fade GROUP signals alternating grey
(even groups) and black (odd groups).
Talkback
4
Talkback to the Matrix output is enabled by the T/B (ENABLE) switch.
Matrix Fader
5
The matrix output fader ha<; + 1 0dB gain at maximum clockwise rotation, and
sets the level at the electronically balanced output. The output connector is a male
XLR
on the rear panel, providing a nominal +4dBu output.
Matrix Status
6
The CUT switch mutes the post-fade signal when pressed.
7
The AFL switch allows post-fade, pre-mute monitoring of the output signal on
the Control Room monitors , Headphones or AFUPFL bargraph meter.
Dual Matrix Output module
Advertisement
Table of Contents
