SoundCraft Vienna II User Manual page 41

Hide thumbs Also See for Vienna II:
Table of Contents

Advertisement

20
GIIOO'
PJ\N
·o·
I•
g;
;/;
•I
··OV""·,
l
·,
l~•-ol
FOJ
~
Em
~
, ... o
110
-•
-
-a
"
13
14
15
16
17
18
~
11
The 60mm stereo input fader, has IOdB of gain at the top of its travel.
Muting
12
The 8 MUTE bus switches, in conjunction with the illuminated CUT
switch (7) and Solo-in-Place system control whether the Stereo Input is ON or
muted. When pressed, the LEDs in the selected MUTE switches glow, indicating
readiness to accept a master mute. If the Stereo Input is muted via a master mute
bus, the CUT switch flashes to indicate that a non-local mute is in operation. The
stereo input is internally selectable to
be
SIP SAFE, ie, not muted by the SIP system.
Group Path
The Group summing amplifier is a low noise, balanced virtual earth design, feeding
the insert point.
The insert is at a nominal level of -2dBu. Separate send and return jacks are
provided;
the send is ground compensated, and the return is electronically
balanced.
13
The post-fade group signal feeds the passive PAN control which positions the
signal in the UR stereo mix if the
L/R
switch is pressed.
14
The
L/R
switch feeds the signal to the main Mix bus, subject to the position
of the PAN control.
15
The feed to the mono bus is enabled by the MONO switch and is sourced pre
the PAN control.
Group Status
16
The balanced insert return jack feeds the CUT button which operates an
electronic mute circuit.
17
The
PFL
switch allows the pre-CUT, pre-fade signal to be monitored.
PFL
feeds the group signal to the PFL bus and changes the central monitoring over to
listen to the selected Group without muting anything else.
18
A red PEAK LED illuminates when the group signal exceeds +14dBu at
pre-fade and post-fade points.
19
The green -30dB LED illuminates when a level of -30dBu or greater is present
post fader.
20
The fader is a long-travel unit, with I0dB of gain at the top of its travel.
Jumper Options
Function
Options
Stereo Input SOLO IN PLACE Mute
JMPI
active/disabled
Default
active
Output Group/Stereo Input module
37

Advertisement

Table of Contents
loading

Table of Contents