Table of Contents
Advertisement
Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the antenna.
2. Install the
system
board.
3. Install the
display
assembly.
4. Install the
I/O
board.
5. Install the
fan
2.
6. Install the
fan
1.
7. Install the
heat
sink.
NOTE:
The system board can be removed or installed together with the heat sink attached. This simplifies the
procedure and avoids breaking the thermal bond between the system board and the heat sink.
8. Install the
M.2 2230 solid-state drive
9. Install the
M.2 2230 solid-state drive
10. Install the
memory
modules.
11. Install the battery.
12. Install the
base
cover.
13. Follow the procedure in
or the
M.2 2280 solid-state drive
or the
M.2 2280 solid-state drive
After working inside your
computer.
from the SSD2 slot.
from the SSD1 slot.
Disassembly and reassembly
55
Advertisement
Table of Contents
