Steps
1. Lift the flap that covers the memory-module slot.
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Slide the memory module firmly at an angle, into the memory-module slot.
4. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
NOTE:
Repeat step 1 to step 4 if there is another memory module to install.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
After working inside your
computer.
Disassembly and reassembly
21