Summary of Contents for Argos Home Normandy 4 Drawer Chest of Drawers
Page 1
4 Drawer Chest Assembly Instructions - 227/6478 Please keep for future reference 266/2185 244/2941 349/8042 356/9304 343/2709 Dimensions Width - 75cm Depth - 40cm MADE IN Height - 74.5cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 4 - 09/09/14...
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 26kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 3
Components - Panels Please check you have all the panels listed below (D2200A) (750 x 396mm) Left Side Right Side Rail (D2198A) (D2199A) (D2201A) (721 x 372mm) (721 x 372mm) (717 x 60mm) 6 Drawer Front (D0218A) (737 x 162mm) Left Drawer Side Right Drawer Side (W370-124LH)
Page 4
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. Large locking Wooden dowel Metal dowel x 14 (F22) (F901)
Page 5
Assembly Instructions Step 1 Prepare the drawer fronts Screw 2 metal dowels into the holes shown on the back of each drawer front Note: Tighten metal dowels up fully against the panels. Step 2 Note: Due to the manufacturing process, the holes for the Prepare the drawer locking nut can be on either surface of the drawer sides.
Page 6
Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
Page 7
Assembly Instructions Step 8 Prepare the left side Place 4 runners left side . Slide back top of runner and use 2nd hole from the front to fit 1st screw Finished front edge Slide runner back the other way and use 2nd hole from the back to fit Finished 2nd screw...
Page 8
Assembly Instructions Step 9 Prepare the right side Place 4 runners right side . Slide back top of runner and use 2nd hole from the front Finished front edge to fit 1st screw Slide runner back the other way and use 2nd hole from the back to fit 2nd screw Finished front edge...
Page 9
Assembly Instructions Step 10 Prepare the 2 rails Insert 2 large locking nuts into the holes in the 2 rails Tap 1 wooden dowel into each end of the 2 rails Step 11 Fit the 2 rails Push the 2 rails onto right side as shown.
Page 10
Assembly Instructions Step 12 Fit the left side Fit the left side to the 2 rails Use a screwdriver to tighten the 2 large locking nuts fitted to the 2 rails Note: Turn the large locking nuts as far as they will go - more than 1/2 a turn.
Page 11
Assembly Instructions Step 14 Fit the top Lower the top onto the side panels Use a screwdriver to tighten the 2 large locking nuts fitted to the inside of the left side and right side Note: Turn the large locking nuts as far as they will go - more than 1/2 a turn.
Page 12
Assembly Instructions Step 16 Fit the drawers Starting with the bottom drawer, slide both the runners forward and locate the drawer 2nd threaded sides hole between them, lining up the holes in the drawer wrap with the 2nd 'threaded' holes in the runners Working from the inside of the drawer, insert 2...
Need help?
Do you have a question about the Normandy 4 Drawer Chest of Drawers and is the answer not in the manual?
Questions and answers