Drain Joint Installation - Bosch Climate 5000 SCI Series Installation Manual

Outdoor Unit Installation
D
Fig. 22.
Outdoor Unit Dimensions
W x H x D
760x590x285
810x558x310
845x700x320
900x860x315
945x810x395
990x965x345
938x1369x392
900x1170x350
800x554x333
845x702x363
946x810x420
946x810x410
952x1333x410
952x1333x415
Table 5. Length Specifications of Split Type Outdoor Unit
(unit: mm)
Table 6.
NOTE :
The minimum distance between the outdoor unit and walls described in
the installation guide does not apply to airtight rooms. Be sure to keep
the unit unobstructed in at least two of the three directions (M, N, P)
(See Fig. 23)
M
N
Fig. 23.
12
A
B
Mounting Dimensions
Distance A Distance B
530 290
549 325
560 335
590 333
640 405
624 366
634 404
590 378
514 340
540 350
673 403
673 403
634 404
634 404
P
Rows of series installation
L
L ≤ H L ≤ 1/2H
1/2H < L ≤ H
L > H Cannot be installed
Table 7. The relations between H, A and L are as follows
H
Fig. 24.
5.2

Drain Joint Installation

If the drain joint comes with a rubber seal (see Fig. 25 - A ), do the
following:
1. Fit the rubber seal on the end of the drain joint that will connect to
the outdoor unit.
2. Insert the drain joint into the hole in the base pan of the unit.
3. Rotate the drain joint 90° until it clicks in place facing the front of
the unit.
4. Connect a drain hose extension (not included) to the drain joint to
redirect water from the unit during heating mode.
If the drain joint does not come with a rubber seal (see Fig. 25 - B ), do
the following:
1. Insert the drain joint into the hole in the base pan of the unit. The
drain joint will click in place.
2. Connect a drain hose extension (not included) to the drain joint to
redirect water from the unit during heating mode.
NOTE :
Ensure the water drains to a safe location where it will not cause water
damage or a slipping hazard.
Climate 5000 SCI – 6720887422 (2019/07)
A
250 mm or more
300 mm or more
L