Introduction - FLORABEST FHE 550 B2 Translation Of Original Operation Manual

GB

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high
quality product.
During production, this equipment has been checked for quality and subjected to a final
inspection. The functionality of your equipment is therefore guaranteed. It cannot be
ruled out that residual quantities of water or lubricants will remain on or in the equip-
ment/hose lines in isolated cases. This is not a fault or defect and it represents no cause
for concern.
The operating instructions constitute part of this product. They contain important
information on safety, use and disposal.
Before using the product, familiarise yourself with all of the operating and safety
instructions. Use the product only as described and for the applications specified.
Keep this manual safely and in the event that the product is passed on, hand over
all documents to the third party.
Contents
Introduction ...............................42
Intended purpose .......................43
General description ....................43
Enclosed parts.............................. 43
Overview .................................... 43
Technical Data ............................44
Notes on safety..........................44
Symbols used in the instructions ...... 45
Symbols used on the device ........... 45
General Safety Directions for Power
Tools .......................................... 45
Chain saw safety warnings ............ 48
Causes and operator prevention of
kickback ...................................... 49
Further safety directions ................. 50
Fitting ........................................50
Assembling the Round Handle ........ 51
Attaching the Shoulder Strap.......... 51
Installing the Blade ...................... 51
Fitting the saw chain ..................... 51
Tensioning the saw chain ............... 51
Chain lubrication .......................... 52
Operation startup ......................52
Before starting, check .................... 52
Switching On and Off ................... 53
42
Adjusting the Telescopic Handle ..... 53
Handle Adjustment ....................... 53
Working Safely ..........................53
Transport ..................................53
Sawing techniques .....................54
Sawing Off Small Branches ........... 54
Sawing Off Larger Branches .......... 54
Sawing Off Parts .......................... 54
Cleaning ....................................55
Storage ......................................55
Resharpening of the saw chain ..55
Waste disposal and environ-
mental protection .......................55
Accessories Enclosed ..................55
Spare parts ................................55
Maintenance Interval Table ........56
Trouble shooting ........................57
Guarantee .................................58
Repair Service ............................59
Service-Center ............................59
Service Branch ...........................59
Translation of the original EC
declaration of conformity ...........60
Exploded Drawing .....................61