Replacing The Fuse; Screen Messages - X-Rite Macbeth Lighting SpectraLight QC Operation Manual

Replacing the Fuse

1. Turn off the main power switch and unplug AC line cord before proceeding.
2. Using a flat blade screwdriver, push in on fuse holder and rotate counterclockwise 1/4 turn.
3. Remove fuse holder and discard blown fuse.
4. Refer to the following chart for fuse requirements.
AC Requirements
115 VAC
230 VAC
100 VAC
5. Insert new fuse into the holder and then insert into the unit.
6. Using a flat blade screwdriver, push in on holder and rotate 1/4 turn clockwise until secure.
7. Plug in the AC power and turn on the power switch to begin normal operation.

Screen Messages

Screen messages can appear on the display during error conditions or for informational purposes. Some
messages require user interaction to clear while others only appear momentarily and require no action.
If an error message persists, please contact our technical support using one of the methods listed in the Service
Information section.
User action message example
Switch descriptions
HELP: Provides additional information on the message to help diagnose the problem.
REMOV:
Keeps the message from appearing in the future.
OK: Clears the message from the screen.
Fuse location
Fuse Type
F 10 A H 250 V (5x20 mm)
F 6.3 A H 250 V (5x20 mm)
F 15 A H 250 V (5x20 mm)
Momentary message example
S p e c t r a L i g h t Q C
41