Create Operator Profiles (Profl) - X-Rite Macbeth Lighting SpectraLight QC Operation Manual

S p e c t r a L i g h t Q C

Create Operator Profiles (PROFL)

The profile screen is used to create up to 16 profiles. Once created, you can customize the switches and setup
an auto sequence. Individual profiles are then selected through the User Settings screen.
1. From the Advanced Setup 1 screen, press the MORE switch to access the Advanced Setup 2 screen.
2. Press the PROFL switch to access the Profile List screen.
3. See Creating a profile and editing a profile procedures that follows.
Creating a Profile by Copying the Factory Profile
1. Use the up (▲) and down (▼) arrow switches to highlight "Factory" and press the COPY switch.
2. Use the up (▲) and down (▼) arrow switches to highlight the next available "Free" location for a new profile.
3. Press the PASTE switch and then the Yes switch, and edit the profile name as needed (see below).
4. Edit the remaining profile parameters. See Editing a Profile that follows.
Copying an Existing Profile
1. If you want to copy an existing profile, highlight the profile and press the COPY switch. The profile will be
used as the template for the new profile.
2. Use the up (▲) and down (▼) arrow switches to select the location to copy the profile. This can be a "free"
location or you can overwrite and existing profile location.
3. Press the PASTE switch and then the Yes switch to paste a copy of the selected profile to the new location.
4. Edit the name of the new profile as needed and then edit the parameters. See Editing a Profile that follows.
Entering name using the front panel:
Use the left (◄), right (►), up (▲), and down (▼) arrow switches to highlight the letter/number in the list.
•
• Use the BACK switch to delete one character at a time.
Press the ENTER switch to add the character to the name.
•
• Continue with additional letter/numbers until the name is complete.
Press the DONE switch and then the Yes switch when finished.
•
20