Related Manuals for Ingersoll-Rand 2705P1
Summary of Contents for Ingersoll-Rand 2705P1
- Page 1 16601023 Edition 1 January 2010 Air Impact Wrench 2705P1 Maintenance Information Save These Instructions...
- Page 2 Note: When reading the instructions, refer to exploded diagrams in parts Information Manuals when applicable (see under Related Documentation for form numbers). Lubrication Each time a Series 2705P1 Impact Wrench is disassembled for Use Ingersoll Rand No. 50 Oil for lubricating the motor. Inject maintenance and repair or replacement of parts, lubricate the tool...
- Page 3 Assembly General Instructions Apply a thread locking compound to the Reverse Valve Knob Screw (16). Attach the Reverse Valve Knob (15) to the Reverse Always press on the inner ring of a ball-type bearing when Valve with the Reverse Valve Knob Screw, and tighten the Screw installing the bearing on a shaft.
-
Page 4: Troubleshooting Guide
Troubleshooting Guide Trouble Probable Cause Solution Low power Dirty Inlet Bushing or Air Strainer Screen Using a suitable cleaning solution in a well ventilated and/or Exhaust Silencer. area, clean Air Strainer Screen, Inlet Bushing and Exhaust Silencer. Replace complete set of Vanes. Worn or broken Vanes. - Page 5 Notes:...
- Page 6 Notes:...
- Page 7 Notes:...
- Page 8 www.ingersollrandproducts.com © 2010 Ingersoll Rand Company...