Replacing The Battery - SJCAM SJ10PRO User Manual

REPLACING THE BATTERY

1 1 1
Open the ba ery cover by holding the
lock bu on down and sliding the cover
in the direc on shown above.
2 2 2
PULL TAB
While pressing on the lock, swing the
ba ery door open.
Grab the pull-tab with your fingers.
3 3 3
Pull the ba ery out.
Insert a freshly-charged ba ery in.
NOTE: The ba ery will only go in in one
direc on. Check that the arrow printed on the
label at the bo om points to the front of the
camera.
All graphics, words, and design by Troy Ferrer 2020 troy@sjcamhd.com