General Settings - SJCAM SJ10PRO User Manual

GENERAL SETTINGS - Page 1
LANGUAGE › Options for system language.
Language
English
WIFI • Switches WiFi communication to app on or off. When active: scan networks, select your
camera's SSID and then connect on your phone before opening the SJCAM app.
WiFi
Off
WIFI FREQUENCY • Switch from either standard 2.4GHz, or 5GHz (faster and farther reach).
WiFi Frequency
2.4 GHz
FORMAT • Completely erases everything on the memory card, then sets it up as a new
drive. SJ8 PRO supports both FAT32 and ExFAT. Format the card to ExFAT on your desktop
whenever possible, to allow recording files more than 4GB in size.
Format
AUTO POWER OFF • Automatically turns the camera off at a preset time.
Works only if the camera is on standby and not recording.
Auto Power Off
5 Minutes
LCD OFF TIME • Automatically turns the display off at a preset time. To wake up the
display, simply tap the screen or short-press any button once.
LCD Off Time
3 Minutes
POWER-RELATED TIPS
• Set the Auto Power Off to 3 minutes
to get the most out of your ba ery's
charge. If no ac vity is detected within
this period, your camera will power off.
• Go to LCD Off Time and set it to the
shortest possible me. Configure the
lightset so you know whether you're
recording or not.
• Plan your video recordings ahead to
maximize ba ery power.
• When recording, avoid constantly
checking the LCD to see if the
camera is running. LCDs use up a lot
of ba ery power. Use the indicator
lights instead to know the status.
• Your camera uses a Lithium ba ery,
you can charge it even if you only
used half the capacity.
• Get a charger and spare ba ery, and
interchange between ba eries to
relieve your current one from stress of
constant-use.
• For faster charging, turn the camera
off while it is plugged in.
All graphics, words, and design by Troy Ferrer 2020 troy@sjcamhd.com