Advertisement

EMPOWER YOUR DREAMS
USER MANUAL
All graphics, words, and design by Troy Ferrer 2020 troy@sjcamhd.com

Advertisement

Table of Contents
loading

Summary of Contents for SJCAM SJ10PRO

  • Page 1 EMPOWER YOUR DREAMS USER MANUAL All graphics, words, and design by Troy Ferrer 2020 troy@sjcamhd.com...
  • Page 2 -SJCAM CEO All graphics, words, and design by Troy Ferrer 2020 troy@sjcamhd.com...
  • Page 3 It is important to keep your camera’s firmware up to date. You may connect your camera via WiFi to the SJCAM ZONE app to automa cally download and install the latest firmware, or visit www.sjcam.com/firmware.
  • Page 4: Specifications

    SPECIFICATIONS CHIPSET: Ambarella H22 S85 SENSOR: SONY IMX377 SENSOR RESOLUTION: 12 MegaPixels LCD SCREEN: 2.33” IPS Touch Screen LENS: 7G ( 2 Aspheric Lens included) ANGLE: 170° APERTURE: F 2.8 FOCAL LENGTH: 2.8mm VIDEO RESOLUTION: 4K:(3840×2160)25/30/50/60fps, 1440P:(1920×1440) 25/30/50/60fps, 1080P:(1920×1080) 24/25/30/50/60/120fps. 720P:(1280×720) 240fps BATTERY CAPACITY : 1300mAh Detachable Ba ery WEIGHT: 85 G DIMENSIONS: 62.5 MM 41 MM 28.8 MM...
  • Page 5: Parts Of Your Camera

    PARTS OF YOUR CAMERA 2.33” Touchscreen Removable Lens Guard Power/Shutter Button Speaker USB Port and Status Indicator MicroSD Slot Cover Lens 1/4-inch Tripod Battery Compartment Mircophone Mounting Hole All graphics, words, and design by Troy Ferrer 2020 troy@sjcamhd.com...
  • Page 6 SJ SMART REMOTE (Op onal) Once your Remote is paired, you will never need to pair it again with your camera. WIFI On/Off Switch Camera-Off Button When the SJ10 PRO is powered on, SJ Remote can begin sending commands to your camera. The Remote is tested to work at Burst Shot Button a maximum distance of 10 meters...
  • Page 7 POWERING ON 2 2 2 On the top right side of your camera The SJCAM splash-screen will briefly is the Power/Shu er Bu on. show while the camera ini alizes, Press and hold it down to start your and will immediately proceed to the camera.
  • Page 8: Replacing The Battery

    REPLACING THE BATTERY 3 3 3 1 1 1 PULL TAB Open the ba ery cover by holding the While pressing on the lock, swing the Pull the ba ery out. lock bu on down and sliding the cover ba ery door open. Insert a freshly-charged ba ery in.
  • Page 9: Inserting A Microsd Card

    INSERTING A MICROSD CARD SWING DOOR OUT Align the MicroSD card to the slot with the Locate the covered MicroSD card slot card face towards the front of the camera. on the le side of the camera. Gently push it in un l it clicks into place. Push the bu on and slide the door down.
  • Page 10 INSERTING A USB-C CABLE 2 2 2 SWING DOOR OUT Firmly insert the USB-C cable Locate the covered USB Type-C port included in the package all the way in. on the le side of the camera. Status indicator will light up RED when Push the bu on and slide the door down.
  • Page 11: The Main Screen

    The Main Screen Elapsed Time | Time le on Card WiFi Ac ve | Frequency Microphone Ac ve Current Mode Icon Ba ery Level Indicator Icon shows what mode you are currently in. 00:00:00 | 02:06:16 Displays approximate power le on the ba ery.
  • Page 12 Toggles Screen Playback Op ons General Se ngs Lock Screen WiFi Remote Control Format Language WIFI English Video Picture 00:00:00 | 02:06:16 Auto Power Off LCD Off Time Front Display 3 Minutes 3 Minutes > 4K (3840x2160) 60 fps 2018-06-06 04:20:43 ISO:Auto Shutter Time1/2...
  • Page 13 Toggles Screen Lock Screen Turns off the display and disables the touchscreen to avoid accidental taps. Swipe the key icon to the lock to enable the touchscreen again. Lock Screen WiFi Toggle Lock Screen WiFi Remote Control Enable or disable the WiFi by tapping this and se ng it. WiFi Enable or disable FPV (First-Person View) via a special cable.
  • Page 14: Playback Screen

    Playback Screen Ba ery Status Indicator Elapsed Time 00:00:00 Shows how much power is le . Shows how much of the file is being played Go to previous file Go to Next File Tap or swipe right to get to the previous file. Tap or swipe le to get to the next file.
  • Page 15 Mode Selec on Swipe UP to access Video+Photo, and Car Modes. Mode for recording videos. Video Video VideoLapse Slow Motion Timelapse photography s tched on-cam to produce a video. VideoLapse For recording video in slow mo on. Photo PhotoLapse Burst Mode Slow Motion S ll photograph mode.
  • Page 16 > White Balance Auto You can switch to text-only menu by going Classic to General Se ngs and choose “Classic” in User Interface op ons. > Color Profile Flat SJCAM All graphics, words, and design by Troy Ferrer 2020 troy@sjcamhd.com...
  • Page 17: Resolution Selection

    RESOLUTION SELECTION > 4K (3840x2160) 60 fps 12MP 4000x3000 4:3 > 4K Ultra (3840x2160) 30 fps 10MP 3468x2736 4:3 > 2.7K (2720x1520) 30 fps 8MP 3840 Video Modes Photo Modes IMPORTANT! To ensure you get the full poten al of your SJ10 PRO, it is very strongly 4K •...
  • Page 18: Mode Settings

    Power On Record -4/3 -4/3 DARKER -5/3 -5/3 COLOR PROFILE • You are given 2 preset choices: SJCAM - Vivid, and Flat. -2.0 -2.0 Choose Flat to preserve color dynamics; SJCAM - Vivid to enhance colors. Color Profile Flat METERING • Tells the camera which portion of the scene takes priority when setting the brightness level of the whole image.
  • Page 19 MODE SETTINGS - Page 2 ENCODING • H.264 is a standard for writing video files, high compatibility with video players. H.265 is a newer standard that compresses video much better for smaller file sizes and A visual explana on of how faster streaming, may require you to update your video player’s codec.
  • Page 20 MODE SETTINGS - Page 3 VIDEO QUALITY • Gives you the option of recording video in high bitrate for more image detail per frame, but will result in much bigger file sizes. METERING OPTIONS Encoding H264 PHOTO QUALITY • Presets for making adjustments on how much detail is written in photos. Options: Fine, Standard, and Economy.
  • Page 21 MODE SETTINGS - Page 4 RAW • Enables or disables saving pictures as image sensor data onto a file (.RAW), preserving image details for editing later. Requires a converter for use with image manipulation software. NOTE: RAW is not readily viewable until converted or output to JPEG. H.265 H.265 H.265...
  • Page 22: General Settings

    WIFI • Switches WiFi communication to app on or off. When active: scan networks, select your camera’s SSID and then connect on your phone before opening the SJCAM app. • Go to LCD Off Time and set it to the shortest possible me.
  • Page 23 GENERAL SETTINGS - Page 2 FRONT DISPLAY • Enables or disables the small front LCD when not needed. Front Display INDICATOR LIGHT • Enable or disable the status indicator light on the camera. Indicator Lights KEYPAD TONE • Enables or disables system sounds as an audible indicator of status and button presses.
  • Page 24 GENERAL SETTINGS - Page 3 EXTERNAL MICROPHONE • Enables or disables external microphone. External microphone must be inserted first into the USB slot (sold separately). External Microphone CAUTION: • Make sure the grey rubber seals DATE / TIME • Sets camera system date and time. Files will be labeled according to the behind the access doors are present, setting here.
  • Page 25 Version Upda ng your firmware. ZOOM IN SJCAM Zone Mobile App You can access the Frequently Asked Ques ons Supported MicroSD Cards and answers by going to General Se ngs screen and tap this Q&A icon on the bo om right.
  • Page 26: Troubleshooting

    IF CAMERA DOES NOT TURN ON WHEN USING BATTERY Check that the terminal contacts at the end of the battery compartment are not bent or dislodged. If this is the case, contact SJCAM support. All graphics, words, and design by Troy Ferrer 2020 troy@sjcamhd.com...
  • Page 27: File Management

    Connect the USB-C cable, choose “Mass Storage Device” on your camera. b› Your device will show as a drive on your File Manager (Explorer on Windows; Finder in OSX) 2. Via WIFI through the SJCAM Zone App: a› Connect your camera to your phone: Device Se ngs>Wifi>Choose your camera b›...
  • Page 28 Get the app. Follow us Visit us at www.sjcam.com For technical assistance, go to support.sjcam.com All graphics, words, and design by Troy Ferrer 2020 troy@sjcamhd.com...

Table of Contents