jablotron JA-10 User Manual page 9

2. OPERATING THE JA-10 SYSTEM
The JA-10 system may be controlled by system keypads which let you not just control but also display
statuses of individual sections. Statuses of individual sections are indicated by status indicators
A, B, C, D above the LCD display and by the functions buttons. The control panel can be operated directly
(setting or unsetting the alarm and other automation functions) using function buttons on the keypad.
The function buttons and the status indicators A, B, C, D are colourfully backlit in order to clearly indicate
the section status.
GREEN – Unset
Authorization
Authorization can be done by entering an access code on the keypad or using an
RFID tag assigned to a particular user. Each user can have one code and one RFID tag.
The control panel supports RFID tags compatible with 125 kHz EM Unique technology. If higher security
is required the alarm system can be set up to use Double authorization using RFID tags and codes
(an optional function).
If the user wants to control multiple sections simultaneously, he must authorize himself and then press
function buttons of the particular sections subsequently. This way the user can unset all sections (for exam-
ple the house and the garage) within one single authorization.
YELLOW – Partially Set RED – Set
7