Edit Password - Honeywell MBeacon User Manual

Table of Contents

To perform the reset, press [Y/+]. To exit without performing the reset,

press [N/-].

While the MBeacon is being reset to its original factory settings, the

screen shows that the activity is taking place:

When the reset is complete, this screen appears:

Then the unit returns to the Settings menu.

Note: If you perform a factory reset, all of your settings are removed and

cannot be retrieved.

8.1.5 Edit Password

You can change the password by selecting "Edit Password."

At this screen, input your new password over the old one (or the default):

 Increase the number from 0 through 9 by pressing [Y/+].

 Decrease the number from 9 through 0 by pressing [N/-].

 Step from digit to digit using [MODE].

MBeacon User's Guide

Table of Contents