Txpower Setup - Honeywell MBeacon User Manual

MBeacon User's Guide

8.2.3 TxPower Setup

Transmission Power is the amount of power used to send beacon signals
to instruments. Optimum signal strength and battery use are best
balanced during installation.
Note: Using more Transmission Power than necessary reduces battery
life.
Important! It is highly recommended that this setting not be changed
without first consulting the system's integrator.
There are three settings: Low, Medium, and High. The default value is
Medium.
Press [Y/+] to scroll up or [N/-] to scroll down to the setting of your
choice.
1. Press [MODE] to save the change.
The settings are applied.
The screen shows the three choices again.
Press [N/-] to advance to the next screen, Interval Setup.
27