Firmware Version; Factory Reset - Honeywell MBeacon User Manual

MBeacon User's Guide
Press [MODE] to return to the Settings menu. If you do not make a
selection in 60 seconds, the unit automatically exits to the menu.

8.1.3 Firmware Version

This shows the firmware version incorporated in the instrument. It is
read-only. You cannot make changes to the information. To view it,
press [MODE] when its name is highlighted (dark circle):
Press [MODE] to return to the Settings menu. If you do not make a
selection in 60 seconds, it automatically exits to the menu.

8.1.4 Factory Reset

You can perform a factory reset to the instrument's original settings. To
access it, press [MODE] when its name is highlighted (dark circle):
You are asked whether you want to perform the factory reset:
20