Dometic 10 Series Installation Manual page 21

RMD10
➤ Insert the installation frame and screw it down tightly (fig. e, page 9). Use all the
fixing holes for this.
➤ Insert the hood and screw it down tightly (fig. f, page 9).
4.7 Securing the refrigerator
A
NOTICE!
Only screw through the receptacles provided, otherwise foamed
components, such as cables, can be damaged.
I
NOTE
Attach the side walls or the attached strips so that the screws are tight,
even when under increased loads (while driving).
➤ Move the refrigerator into its final location.
➤ Fasten the six screws (fig. g 1, page 9) through the six plastic washers in the
sides of the refrigerator, and further into the wall.
➤ Put the caps (fig. g 2, page 9) onto the screw heads.
EN
Installing the refrigerator
21