Battery Maintenance - Sunrise Medical Sunlift Micro Directions For Use Manual

Hide thumbs Also See for Sunlift Micro:
Table of Contents

Advertisement

Available languages

Available languages

8. Battery maintenance

• Keep batteries fully charged. When the hoist is not in use, keep it charging. Batteries may also be recharged overnight if this is
more practical: the charger will not allow the batteries to be overcharged.
• Charge batteries regularly even if the hoist is not used for a long period.
• Connect the charger cable first to the hoist and then to the mains.
• Do not leave the charger cable plugged into the hoist if it is not to be connected immediately to the mains.
• Never unplug the charger cable by pulling on the cable.
9. User guide for the quickfit sling
From a sitting position
Fig. 1
Ensure that the straps face outward. Pull the sling down over the user's back until the top of the toilet seat opening is at the small of
the back. Check that the sling is aligned properly at shoulder height.
Fig. 2
Lift the patient's leg and slip the strap under it and pull it up between their legs, ensuring that the sling is not creased under the thigh.
Repeat the procedure with the other leg.
Fig. 3
Cross the straps over the legs and attach them to the front hooks on the hoist spreader bar.
Raise the hoist slightly and attach the shorter, shoulder straps to the spreader bar. Move the hoist towards the patient while doing this.
REMEMBER: THE LONG STRAPS ARE FOR THE LEGS, AND THE SHORT ONES FOR THE
SHOULDERS.
From a lying position
Roll the patient over onto the sling, ensuring that the top of the toilet seat opening is at the small of the back.
Cross the straps under the patient's legs and fit the sling as indicated for the sitting position, keeping the shoulder straps as short
as possible.
NB: ENSURE THAT THE PATIENT'S HEAD IS SUPPORTED AT ALL TIMES
14
Batteries
Charging socket
Fig. 1
Fig. 2
Fig. 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents