Page 1
247750 Switch-It Proximity Head Array O w n e r ' s M a n u a l...
Page 2
Thank you for choosing a Switch-It Product. We want to hear your questions or comments about this manual, the safety and reliability of your system, and the service you receive from your Authorized Dealer. Please feel free to write or call us at the address and telephone number below:...
Page 3
NOTE: Check all parts for shipping damage. In case of damage DO NOT use. Contact Carrier/ Sunrise Medical for further instructions. WARNING DO NOT install this equipment without first reading and understanding this manual. If you are unable to understand the Warnings, Cautions, and Instructions, contact a qualified clinician or supplier - otherwise injury or damage may occur.
Page 4
User information Congratulations on choosing a Switch-It product. Sunrise Medical’s high-quality mobility products are designed to enhance independence and make your everyday life easier. As a part of our ongoing product improvement initiative, Sunrise Medical reserves the right to change specifications and design without notice.
Page 5
Switch-It also makes a Sip N’ Puff Combo Head Array, Figure 2. This special configuration allows the user to drive left and right with sensors embedded in the side pads, and forward and reverse with use of the Sip N’...
Page 6
HDR3 and HDR4 Head Arrays come with an 1/8” monojack port which works with common mechanical switches with a monoplug output (i.e. egg switch, micro lite switch, etc). Switch-It Proximity Head Arrays are available with either Switch-It 1/2" square or Whitmyer headrest mounting hardware, Figure 3.
Page 7
Items returned for warranty claim must be evaluated by Switch-It before warranty determination is made. Should a defect in materials or workmanship occur during the warranty period, and the item has not been modified or damaged, Switch-It will, at its option, rework or replace it without charge.
Need help?
Do you have a question about the switch-IT and is the answer not in the manual?
Questions and answers