CONTENTS Safety Precautions and Usage Statements Parts List Base Overview Quick Reference Guide Installation Guide Remote Control Headboard Bracket Installation Guide Battery Backup Strap . 12-13 Setting Up Two Bases Bluetooth Setup Pair Remote . Sound Bar Setup Troubleshooting...
. For Keep the power cord away from heated surfaces . Never operate complete warranty information visit www .ergomotion .com or refer to the base when the air openings are blocked . Keep air openings free the warranty card included with the base .
Page 4
safety precautions and usage statements SAFETY PRECAUTIONS AND USAGE STATEMENTS Casters (optional leg accessory) are equipped with locking wheels to entering, exiting or shifting weight on the base, this contact noise prevent unwanted movement . Even when locked and unable to roll, it may be audible as the wheels make contact .
parts list PARTS LIST Before discarding the packing materials- ensure all the parts are accounted for. All electronics and components that need to be installed are located in boxes under the base or attached to the frame. Wireless Remote Control and (3) AAA batteries Mattress Retainer Bar (1)* Legs (4)
base overview BASE OVERVIEW Underbed Lighting Head Motor Foot Motor USB Ports Soundbar Head Foot Massage Massage Units Units USB Ports Massage Amp Control Box Underbed Lighting...
quick reference guide QUICK REFERENCE GUIDE Not to scale. For illustration purposes only. Read all instructions before beginning installation. Massage Unit Massage Unit Sound bar Massage Amp Sound Bar Sound Bar Power Cord Audio Cable Power Supply Control Box Input Cord Head Motor Foot Motor Power Cord...
To sync two bases with the SmartSync™ cord - see pages 12-13. Locate the Battery Backup Strap . Ensure that it is easily accessible when the base is turned to its upright position . FOR CUSTOMER SUPPORT, VISIT WWW.ERGOMOTION.COM OR CALL: 1-888-550-3746 For customer support, visit www.ergomotion.com or call: 1-888-550-3746...
Page 9
. STEP 8 Plug the base into a power source . A surge protector is strongly recommended. FOR CUSTOMER SUPPORT, VISIT WWW.ERGOMOTION.COM OR CALL: 1-888-550-3746 For customer support, visit www.ergomotion.com or call: 1-888-550-3746...
remote control REMOTE CONTROL REMOTE OVERVIEW MASSAGE FEATURE The HEAD button will turn on the head massage . Cycle through 3 massage intensities . The FOOT button will turn on the foot massage . Cycle through 3 massage intensities . The TIMER/ALL OFF button starts massage at level 2 .
Page 11
remote control REMOTE CONTROL ADJUST ONE TOUCH BUTTONS One touch ZERO-G preset The HEAD arrows lift position . Zero-G adjusts your and lower the head section legs to a higher level than of the base . your heart helping to relieve pressure off the lower back and promote circulation .
battery backup strap BATTERY BACKUP STRAP For emergency use only, in case of a power outage. Batteries are not to be used for normal operation of the bed. STEP 1 STEP 3 Disconnect the Power Supply from the input power cord . Connect the end of the Battery Backup Strap to the input power cord that is attached to the control box .
setting up two bases SETTING UP TWO BASES Connecting straps are secured to the base frame upon delivery. OVERVIEW If a split setup is being installed, plastic connecting straps are provided (one per base) to secure the bases together . Use both straps to secure the head and foot portions together . STEP 1 STEP 2 Slide side (a) of the connecting strap onto leg bolt .
Page 15
setting up two bases SETTING UP TWO BASES A Sync Cord is included with the base. Not available on Queen, Full or Full-Long size bases. The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases. This process is most commonly used for syncing two connected TXL bases.
Bluetooth Setup BLUETOOTH SETUP To operate the base from a smart device, download “Intellibed Sleep Genius” application to the desired smart device from the App Store (Apple) or Google Play Store(Android). STEP 1 STEP 4 Plug the bed into power supply and ensure that your Bluetooth is Go to your smart device's Bluetooth enabled on your smart device .
pair remote PAIR REMOTE The original remote that comes in the box is already paired to the bed base. No further action is required. In the event that the remote is not paired with the base, follow the steps below. STEP 1 STEP 3 Unplug the Power Cord from your power outlet .
sound bar setup SOUND BAR SETUP To operate the sound bar from a smart device, follow the instructions below. STEP 1 STEP 3 Ensure that the Sound Bar Power Cord attached to the Sound Bar is Once connected, you may use the smart device to wirelessly plugged into a power source .
Plug bed base into a different electrical outlet, or test current outlet with another working appliance (a grounded, electrical surge protector is recommended) . If issue is not resolved by following the instructions above, locate serial number on warranty card or back of remote and call Ergomotion Customer Service: 1-888-550-3746...
Need help?
Do you have a question about the INTELLIBED SLEEP GENIUS 3030 Series and is the answer not in the manual?
Questions and answers