Clearances To Combustibles - Fostoria 222 Series Manual

•
•
•
END VIEW – 0 DEGREE TILT
6"
B"
END VIEW – 0-45 DEGREE TILT
24"
FROM A
VERTICAL OR
COMBUSTIBLE
SURFACE
OR
36"
FROM
ANOTHER
HEATER
Heaters should be installed so that the minimum clearance to vehicles, as marked on the
heater, will be maintained. If vehicle lifts are present, ensure that the minimum clearance
to combustibles will be maintained from the highest raised vehicle.
ISSUE DATE 10-09-03
MINIMUM CLEARANCES TO COMBUSTIBLES
EXPLOSION HAZARD
FIRE HAZARD
BURN HAZARD
Serious injury or death may
occur.
Do not use in locations containing
hazardous atmospheres.
Do not touch any part of heater
while in operation or directly
thereafter. It is very HOT.
C"
6"
B"
B"
REV. DATE 12/17
• Dimensions are listed in inches
• Dimension
required clearance to combustibles;
it DOES NOT indicate the required
mounting height.
TOP VIEW - 2 UNITS SHOWN
C"
B" Dimension
2-Lamp units:
-72" for a single unit
B"
-72" for (2) or more
heaters being
mounted end-to-end.
3-Lamp units:
-72" for a single unit
-96" for (2) or more
heaters being
mounted end-to-end.
WARNING!
REV. LEVEL: 17
8
"B" indicates
Multiple Heaters may be butted
together on end surfaces
C"
C" Dimension
TYP. BOTH SIDES AND
ENDS
24"
FROM A VERTICAL
OR COMBUSTIBLE
SURFACE
36"
FROM ANOTHER
HEATER
ECO 1-7383 OIPM P/N 8329
the