•
•
•
•
•
•
ETL listed for suspended, high-bay indoor applications (see table on next page)
•
High-watt-density radiant heat with 180 degree heat pattern.
•
Extruded aluminum housing for commercial applications.
•
"L-brackets included for chain suspension or rigid-mounting.
•
Designed for direct-wire, single or three-phase configurations (see table next page).
GENERAL DESCRIPTION & USE
EXPLOSION HAZARD
FIRE HAZARD
BURN HAZARD
Serious injury or death may
occur
Not for residential use.
Do not use outdoors.
Use for comfort heating only
Do
not
use
locations
containing hazardous or
explosive atmospheres
SPECIFICATIONS
The Fostoria FSA-Series heaters provide
safe, efficient electric infrared heat for total
area heating or spot heating applications for
warehouses, steel mills, machine shops and
many other industrial applications They are
ideal for use in high vibration environments.
Using the "L" brackets on the top of the
housing these overhead heaters can be hung
by chain or rigidly mounted
cleanly, emitting no fumes or odors.
Applications where combustible materials and/or
personnel will be located near these heaters must
adhere to the minimum clearance information
below
REQUIRED CLEARANCES
DO NOT install closer than 36 inches to
a vertical surface or 24 inches to a ceiling.
Heaters MUST BE SEPARATED by more than
36 inches and 87 inches from any combustible
surface in direct radiation path.
4 OF 14
FORM 9761 REV. A
They operate
ECO 1-7899 2/2023