Cypress CY8CKIT-031 Quick Start Manual

1

Install Software

1. Insert the kit CD.
2. Install PSoC Creator, PSoC Programmer,
and kit project software.
3

Program the PSoC Device

1. Open BMM_USB_KIT-001 example
project from PSoC Creator Start page.
2. Click the Program icon on PSoC Creator
to program the board.
3. Unplug MiniProg3 and disconnect power
from the board.
®
PSoC CAPSENSE
QUICK START GUIDE
®
EXPANSION BOARD KIT
2

Board Setup for PSoC Development Kit

1. Install the CY8C38 Family Processor
Module on PSoC Development Kit.
2. Connect MiniProg3 to the CY8C38
Family Processor Module.
3. Ensure default settings are configured
and power the PSoC Development Kit.
4

Test PSoC CapSense Expansion Board Kit

1. Connect J1 of PSoC CapSense Expansion
Board kit to Port A of PSoC Development
Kit; connect J2 to Matrix Button Module
Kit.
2. Power the PSoC Development Kit.
3. Touch a button; the corresponding row
and column LEDs turn on.