NO.
Parts
Procedure
Remark
3
Assy
1) To remove the Cover control box :
Control Out
Pull the motor wire is allow
sufficientspace as shown on the
right side and then remove the
screw.
2) Detach several connectors from
the Assy Control Out.
3) Detach several connectors from
the PCB of Assy Control Out.
1) Release the refrigerant at first.
2) Loosen ng screw on both sides.
3) Disassemble the pipes in both
inlet and outlet with welding torch.
4) Detach the Heat Exchanger.
32