Samsung AR12TVEAAWKNAP Service Manual page 21

NO. Parts Procedure Remark
1 PANEL-FRONT 5) The GRILLE INLET is fixed to
body by hooks in the center and
side area.
6) Separate the hook pulling end
of the GRILLE INLET as shown in
figures.(Watch out for the damage
of hooks)
7) To detach the PANEL FRONT
from the main frame, unfasten
2 screws at the bottom. (use (+)
Screw Driver)
8) To detach the PANEL FRONT
from the main frame, loosen 4
hook structures.
When separate the hooks: pull
out each ribs near the hooks as
shown in figures. (Watch out for
the damage of hooks)
21