3.4 Software for configuring a controller
PC Software
To configure the PROFINET network in the IRC5 controller, a PROFINET
configuration file needs to be created and downloaded to the IRC5 controller. This
PROFINET configuration file has to be created using a third party configuration
software. See
NetNames+ is a PC software that is used for diagnostics mainly, like setting the
name, IP address, Subnet Mask, etc of the internal device. For more information,
see
The following third party software PC tools can be used to create PROFINET
configuration files:
Application manual - PROFINET Controller/Device
3HAC050969-001 Revision: G
About the third party tool information on page
NetNames+ on page
•
PROFINET -IO Configurator Express
•
PROFINET -IO Configurator Professional
Note
The software PROFINET-IO Configurator Express, together with NetNames+, is
free to use and is included in the RobotWare distribution package.
Note
PROFINET -IO Configurator Professional provides some added functionality
compared to the PROFINET-IO Configurator Express. For example, functionality
to scan a network and import devices.
© Copyright 2015-2018 ABB. All rights reserved.
3.4 Software for configuring a controller
72.
3 Software overview
71.
33