Configuring The Internal Controller And External Device; Recommended Working Procedure - ABB IRC5 Applications Manual

5 Configuring the internal controller and external device

5.1 Recommended working procedure

General
This section describes the recommended working procedure when installing and
configuring a PROFINET controller. The working procedure helps to understand
the dependencies between the different steps.
Basic steps
Use this procedure to install and configure a PROFINET controller.
1
2
3
4
5
Additional configuration
Action
Configuring Fast Device Startup.
Configuring Shared Device.
Examples
Action
Creating master network configuration file
using PROFINET-IO Configurator Express.
Application manual - PROFINET Controller/Device
3HAC050969-001 Revision: G
5 Configuring the internal controller and external device
Action
Use RobotStudio to configure the topic
Communication.
Use a PROFINET network browser tool
to configure the PROFINET network
settings.
Use an external PROFINET configura-
tion tool to create a project that con-
tains the configuration of the
PROFINET network.
Download the PROFINET configuration
file to the controller.
Configure the I/O devices connected to
the PROFINET network using RobotStu-
dio or FlexPendant.
© Copyright 2015-2018 ABB. All rights reserved.
5.1 Recommended working procedure
See
Technical reference manual - System paramet-
ers
Configuring the PROFINET network settings
on page 36
Creating the PROFINET configuration file on
page 42
Configuring the IRC5 controller on page 43
See
Using Fast Device Startup on page 44
Using Shared Device on page 46
See
Using PROFINET Configurator Express on
page 79
41