6.4.3 Transfer From Device
Parent
Transfer From Device belongs to the type Signal, in the topic I/O System.
Cfg name
TransferFromDevice
Description
The parameter Transfer From Device specifies that the bit value for the internal
device (starting at the offset specified in the parameter Input Offset On Destination
Device) shall be transferred to the signal.
Prerequisites
The option PROFINET Controller/Device must be installed.
Limitations
Only the input bits from the PROFINET internal device can be transferred to the
signals of type digital output and group output.
Allowed values
The allowed value is the PROFINET internal device.
Application manual - PROFINET Controller/Device
3HAC050969-001 Revision: G
© Copyright 2015-2018 ABB. All rights reserved.
6 System parameters
6.4.3 Transfer From Device
PROFINET Controller/Device
65