Cornwell Tools CCT108ID Operating Instructions Manual

Operating Instructions • Warning Information
ALWAYS READ INSTRUCTIONS BEFORE
USING POWER TOOLS
ALWAYS WEAR SAFETY GOGGLES
WEAR HEARING PROTECTION
AVOID PROLONGED EXPOSURE TO VIBRATION
SPECIFICATIONS
RPM .................................................................................. 1,870
Drive Size ............................................................................ 1/4"
Torque Range .............................................................5-75 ft/lbs
Length ................................................................................. 5.5"
Weight (Tool With Battery) ................................................1.9 lbs.
Height (Tool With Battery) .................................................... 7.6"
Battery Type ............................................................ 10.8V Li-ion
Battery Capacity ................................................................ 1.5Ah
Charging Time .............................................................< 60 min.
Compatible Battery .....................................................CCT108LB
Compatible Charger ........................ CCT108CHRG and CCTCHRG
CCT108ID
• Parts Breakdown
WARNING
Some dust created by power sanding, sawing,
grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed to
filter out microscopic particles.
CCT108ID
10.8V Li-ion
Impact Driver
1
WARNING
revised 08/25/10