Advertisement
Quick Links
CHRYSLER
2011 - 2014
200
2008 - 2010
300/300C
2008 - 2010
Aspen
DODGE
2007 - 2015
Avenger
2010 - 2012
Caliber
2008 - 2017
Caravan
2009 - 2014
Challenger
2008 - 2010
Charger
JEEP
2008 - 2010
Commander
2009 - 2017
Compass
2008 - 2013
Grand Cherokee
RAM
2009 - 2012
Ram
VOLKSWAGEN
2009 - 2013
Routan
- MYGIG Radio
1. Not compatible if Factory RSE is installed.
2. Not compatible if Factory Rear-View Camera is installed.
3. Does not supply Reverse Trigger on Manual Transmissions. Camera power must be tapped to reverse light wire.
MG-3
CAN Interface
2007 - 2011
2008 - 2017
2008 - 2012
2008 - 2013
2009 - 2010
2007 - 2012
2008 - 2015
2009 - 2017
2007 - 2017
MG-3 Harness
1 / 4
Sebring
Town & Country
Dakota
Durango
Journey
Nitro
Liberty
Patriot
Wrangler
Rev.032317
Advertisement
Related Manuals for Crux MG-3
Summary of Contents for Crux MG-3
- Page 1 1. Not compatible if Factory RSE is installed. 2. Not compatible if Factory Rear-View Camera is installed. 3. Does not supply Reverse Trigger on Manual Transmissions. Camera power must be tapped to reverse light wire. MG-3 MG-3 Harness CAN Interface 1 / 4 Rev.032317...
- Page 2 NOTE: Does not supply Reverse Trigger on Manual Transmissions. Camera power must be connected to the factory +12V reverse light wire instead. DIP Switch Setting Function Activate Video in Motion Activate rear-view camera Not Used Not Uses 5 & 6 CAN–Termination (Default to OFF) Rev.032317 2 / 4...
- Page 3 3. Remove the gray 22-pin male connector from the back of the headunit and plug it to gray 22-pin female connector on the MG-3 T-harness . Connect the gray 22-pin male factory radio harness. connector of the MG-3 T-harness to the 4.
- Page 4 SWITCHING SOURCE INPUTS 1. Press RADIO/MEDIA button; 2. Tap VES on the screen; 3. Tap AUX IN 1 to select the interface as current AV-source. DISC NOTE: The VES button is only active after the interface is installed. Note: The interface switches automatically to an installed rear-view camera when reverse gear is engaged.
Need help?
Do you have a question about the MG-3 and is the answer not in the manual?
Questions and answers