External Device Settings - Toshiba TC Series Manual

Device Setting
To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]
window, select the external device and click [Settings]
To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add
Device] to add another External Device.

External Device Settings

Use the ladder software (TCPRGOS-W (E)) to set up communication settings on the External Device.
Refer to your External Device manual for details.
After setup is complete, restart the External Device to enable the settings.
Procedure
1
On the computer, start the ladder software.
2
From the [Tool] menu, select [Register editor].
The [Register data] window appears.
3
Set the register as follows.
Double-click [HEX] in the register column and enter the value in the [Data change] dialog box.
CPU
D37E
D37F
• The following items are fixed.
GP-Pro EX Device/PLC Connection Manual
Register
0000h Communication speed (9600bps)
0003h
Setting Information
Communication Type
Data Length
Parity
Stop Bit
28
TC Series (TCmini/TC200) Driver
.
Setting
Host Communication mode
Value
RS-422/485 (2wire)
8 bit
None
2 bit