Introduction - Toshiba TC Series Manual

Introduction

This manual describes how to connect the Display and the External Device (target PLC).
In this manual, the connection procedure will be described by following the below sections:
1
System Configuration
This section shows the types of External
Devices which can be connected and SIO
type.
2
Selection of External Device
Select a model (series) of the External
Device to be connected and connection
method.
3
Example of Communication Settings
This section shows setting examples for
communicating between the Display and
the External Device.
4 Setup Items
This section describes communication
setup items on the Display.
Set communication settings of the Display
with GP-Pro Ex or in offline mode.
5
Cable Diagram
This section shows cables and adapters
for connecting the Display and the
External Device.
Operation
GP-Pro EX Device/PLC Connection Manual
TC Series (TCmini/TC200) Driver
"1 System Configuration" (page 3)
"2 Selection of External Device" (page 7)
"3 Example of Communication Setting"
(page 8)
"4 Setup Items" (page 31)
"5 Cable Diagram" (page 36)
2