Toshiba TC Series Manual page 57

*3 All GP3000 models except the GP-3200 Series and AGP-3302B
*4 Only COM ports that support RS-422/485 (2 wire) communication.
" IPC COM Port" (page 5)
*5 Except GP-4203T
*6 All GP4000 models except GP-4100 Series, GP-4*01TM, GP-4201T and GP-4*03T
*7 When using a Terminal Block Conversion Adapter (CA3-ADPTRM-01) instead of the RS-422 Terminal Block
Conversion Adapter, refer to Cable Diagram 5A.
5A)
Display
• To insert termination resistance of 100Ω on the External Device, turn on DIP Switch SW5-7.
• For the External Device connector, use the XH connector (XHP-8) by J.S.T. Mfg.
GP-Pro EX Device/PLC Connection Manual
Display side
Terminal block
CA3-ADPCOM-01
Signal name
CA3-ADPTRM-01
Shield
TRM
RDA
RDB
SDA
SDB
SG
FG
User-created cable
57
TC Series (TCmini/TC200) Driver
External Device side
Pin Signal name
3 RXD+
4 RXD-
8 FG