Toshiba TC Series Manual page 25

Device Setting
To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]
window, select the external device and click [Settings]
To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add
Device] to add another External Device.
External Device Settings
RS-422/485 Communication Port Settings
To set the External Device's RS-422/485 communication port to half-duplex communication, set the jumper (for
TC3-01) or DIP Switch (for TC8-00) as follows.
Refer to your External Device manual for details.
• Setup Description
CPU
TC3-01
TC8-00
Register Settings for RS-422/485 Communication
Use the ladder software (TCPRGOS-W (E)) to set up RS-422/485 communication.
Refer to your External Device manual for details.
After setup is complete, restart the External Device to enable the settings.
GP-Pro EX Device/PLC Connection Manual
Jumper/DIP Switch
JP15, between pins 2 and 3
JP3
JP4
SW5-1
SW5-2
SW5-3
SW5-4
SW5-5
.
Setting
Short
Short
Short
OFF
OFF
ON
ON
ON
25
TC Series (TCmini/TC200) Driver