Toshiba TC Series Manual page 30

External Device Settings
Use the ladder software (TCPRGOS-W (E)) to set up communication settings on the External Device.
Refer to your External Device manual for details.
After setup is complete, restart the External Device to enable the settings.
Procedure
1
On the computer, start the ladder software.
2
From the [Tool] menu, select [Register editor].
The [Register data] window appears.
3
Set the register as follows.
Double-click [HEX] in the register column and enter the value in the [Data change] dialog box.
Register
D12E
D12F
• The following items are fixed.
GP-Pro EX Device/PLC Connection Manual
Setting
0000h Communication speed (9600bps)
0000h
Setting Information
Communication Type
Data Length
Parity
Stop Bit
30
TC Series (TCmini/TC200) Driver
Setup Description
Host Communication mode
Value
RS-422/485 (2wire)
8 bit
None
2 bit