Toshiba TC Series Manual page 34

Setup Items
Timeout
Retry
Wait To Send
Device Setting
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings]. Touch the External Device
you want to set from the displayed list, and touch [Device].
Setup Items
Device/PLC name
Series
PC No.
*1 In the case of TC200 series or TC200S series, set "0 to 63" when using a communication module, and set "64"
when using RS-232C connector on CPU.
In the case of a TCmini series, the PC number cannot be set.
GP-Pro EX Device/PLC Connection Manual
Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the
response from the External Device.
In case of no response from the External Device, use an integer from 0 to 255 to enter how
many times the Display retransmits the command.
Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.
Select the External Device to set. Device name is a title of the External Device set with GP-
Pro EX. (Initial value [PLC1])
Display the External Device series.
Enter the PC No. of the External Device.
Setup Description
Setup Description
*1
34
TC Series (TCmini/TC200) Driver