Remote Control - Miele G 7960 C SCVi Operating Instructions Manual

Settings
Reset network configuration?
This menu option will only be displayed
if you have connected your dishwasher
to your WiFi network.
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be
reset whenever a dishwasher is being
disposed of or sold, or if a used
dishwasher is being put into operation.
This is the only way to ensure that all
personal data has been removed and
the previous owner will no longer be
able to access the dishwasher.
 Select the menu option
configuration? .
 Select the Yes menu option and
confirm with OK.
38

Remote control

If you wish to permanently switch off
the
this under this menu option. The
 sensor control will then no longer be
available to select until you change this
setting again.
Even if the
switched off, you can use Miele@mobile
to call up information about your
Reset network
appliance. However, you cannot start
any programmes or change any
settings from it.
This menu option will only be
displayed if you have connected your
dishwasher to your WiFi network (see
"Settings" chapter, "Miele@home"
section)
Remote control
Remote control
option, you can do
option is