Table of Contents
Advertisement
Water drainage
The dishwasher's drainage system is
fitted with a non-return valve, which
prevents dirty water from flowing back
into the appliance via the drain hose.
The dishwasher is supplied with
approx. 1.5 m of flexible drain hose with
an internal diameter of 22 mm.
The drain hose can be extended using a
connection piece to attach a further
length of hose. The drainage length
must not be longer than 4 m and the
delivery head no higher than 1 m.
If the hose is to be directly fitted to the
drainage outlet on site, use the hose
clip supplied (see installation plan).
The hose can be directed to the left or
the right of the appliance.
The on-site connector for the drain hose
can be adapted to different hose
diameters. If the connector extends too
far into the drain hose, it must be
shortened. Otherwise, the drain hose
can become blocked.
The drain hose must not be shortened.
Lay the drain hose so that it does not
kink and is not being subjected to
pressure or tension.
Risk of damage from leaking
water.
Leaking water can cause damage.
After commissioning, make sure that
the water is not leaking.
Installation
117
Advertisement
Table of Contents
