Remote Control - Miele G 7360 SCVi AutoDos Operating Instructions Manual

Settings
Reset
This menu option only appears if you
have already connected your dish-
washer to your WiFi network.
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be re-
set whenever a dishwasher is being dis-
posed of or sold, or if a used dish-
washer is being put into operation. This
is the only way to ensure that all per-
sonal data has been removed and the
previous owner will no longer be able to
access the dishwasher.
 Select the
Reset
confirm with OK.
38
menu option and

Remote control

This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
"Settings" chapter, "Miele@home"
section)
If you wish to permanently switch off
the
Remote control
this under this menu option. The
 sensor control will then no longer be
available to select until you change this
setting again.
Even if the
Remote control
switched off, you can use Miele to call
up information about your appliance.
However, you cannot start any pro-
grammes or change any settings from
it.
option, you can do
option is