Miele G 7960 C SCVi Operating Instructions Manual page 75

Setting EcoStart
You can use the EcoStart
benefit from cheaper energy tariffs at
night. Before you can use this option,
you need to set up to three electrical
tariff time zones (see "Settings"
chapter, "EcoStart" section).
Then set the latest time by which the
selected programme has to be finished
by.
The dishwasher will then start
automatically in the most economical
tariff zone within the time set.
 Set the hours with the  sensor
controls.
 Touch the minute number block.
 Use the  sensor controls to enter
the minutes and confirm your entry
by touching OK.
The estimated start time for the
selected programme will appear in the
display for several minutes.
 Close the door.
The message Waiting for EcoStart
appear in the display.
The selected programme will start
automatically when the estimated start
time is reached.
function to
will
Setting SmartStart
The SmartStart function is used for
starting your dishwasher automatically
at a time when your energy costs are
most economical.
To use this function you may need
further technical accessories.
If you have activated the
function in the
SmartStart
the Timer  menu will no longer show
the EcoStart function but will instead
show SmartStart (see "Settings" chapter,
"Miele@home" section).
If your energy provider offers this
service, they will send a signal to your
dishwasher when energy costs are at
their most economical.
This signal will start the dishwasher.
You can set the time by which the
selected programme has to be finished
by. The dishwasher will then calculate
the latest possible start time for the
programme selected and will wait until
this start time for the signal from the
energy provider.
Options
menu,
Settings
75