Door release
Problem
The optical in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
The following fault is
indicated via the
display:
Fault F 33: Open the
door manually. Call Miele
Service
Cause and remedy
Before rectifying the problem:
Switch the dishwasher off.
The door does not open automatically.
There may be a technical fault.
Open the door manually (see "Before using for the
first time – Opening the door") and switch the
dishwasher back on again.
If the same fault message appears again, call the
Miele Customer Service Department.
The door does not close automatically.
The door might be obstructed by an item inside the
appliance.
If this is the case, remove the item causing an
obstruction and switch the dishwasher on again.
If the same fault message appears again, call the
Miele Customer Service Department.
Problem solving guide
99