Miele G 7960 C SCVi Operating Instructions Manual page 18

Guide to the appliance
Display functions
The display is used to select or set the
following:
- The programme
- Options
- The timer
- The Settings
The display can show the following:
- The programme name
- The programme stage
- The estimated time left for the
programme to run
- The energy and water consumption
(EcoFeedback)
- Any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensor controls
during this time.
Touch the  sensor control to switch
the dishwasher back on.
18
The sensor controls on the control
panel and in the display react to
fingertip contact.
The touch display can be scratched
by pointed or sharp objects, e.g.
pens.
Only touch the display with your
fingers.
Touch the required menu option to
select it.
The currently selected setting is marked
in orange and can be changed.
The OK sensor control in the display is
used to confirm a message or setting
and to move to another menu level.
To exit a sub-menu again, use the
 Back sensor control.
Touch the  sensor control at any time
to return to the Programme menu.
If you do not press any sensor controls
for several seconds, the display will
revert to the previous menu. You will
then have to enter your settings again.