Remote Control; Remote Update - Miele G 5892 Operating Instructions Manual

Remote control

This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
"Miele@home" under "Settings").
If you have switched on the
trol option, the MobileStart
is displayed under  Additional pro-
grams/Settings.
If you wish to permanently turn off the
Remote control option, you can do this
under this menu option. The
menu option will then no longer be dis-
played.
Even if the
Remote control
turned off, you can use Miele to call up
information about your appliance. How-
ever, you cannot start any programs or
change any settings from it.
Remote con-
menu option
MobileStart
option is

Remote update

The RemoteUpdate menu option is
only displayed and can only be se-
lected if the requirements for using
Miele@home have been met (see
"Miele@home" under "Before using for
the first time").
The RemoteUpdate function is used for
updating the software in your dish-
washer. If an update is available for
your dishwasher, it will automatically
download it. Updates will not be in-
stalled automatically. They must be initi-
ated manually.
If you do not install an update, you can
continue to use your dishwasher as
usual. However, Miele recommends in-
stalling updates.
Activating/deactivating
The RemoteUpdate function is acti-
vated as standard. Available updates
will be downloaded automatically but
will only be installed if you initiate instal-
lation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
Settings
37