Follett Horizon Chewblet 1000 Series Manual page 7

Horizon
Chewblet ice icemaker
1000 Series – 32" (81 cm)
1400 Series – 31.4" (80 cm)
1800 Series – 31.4" (80 cm)
Condensing unit requirements/unit specifications
Models HCD1000
Shipping weight
225 lbs (102 kg)
Standard electrical
Voltage 208-230
Phase 1-phase
Hertz 60 cycles
Amps 7.4 (max.)
Circuit 15 Amps
Condensing unit operating limits
All models
Air temperature -20 F (29 C)
Condensing unit location/installation limits
All Models
Maximum refrigerant line run length:
Maximum line rise above evaporator:
Evaporator mounting above condenser:
or maximum refrigeration line drop:
Side View
26.6"
(68 cm)
HCD1400 HCD1800
330 lbs (150 kg) 385 lbs (175 kg)
208-230 208-230
1-phase 1-phase
60 cycles 60 cycles
14.7 (max.) 15 (max.)
30 Amps 50 Amps
Minimum Maximum
120 F (49 C)
100 ft (30.5 m)
35 ft (10.7 m)
15 ft (4.6 m)
15 ft (4.6 m)
Follett Corporation
801 Church Lane • Easton, PA 18040, USA
+1 (610) 252-7301 • Fax +1 (610) 250-0696
www.follettice.com
KaTom Restaurant Supply, Inc.
1000 series, 1400 series or 1800 series
with remote air-cooled condensing unit
Condensing unit requirements/unit specifications
Front View
40.7" (103 cm)
Cooling capacity for icemakers connected to rack
systems
Models
BTU/hr (Kcal/hr) at
0 F (-18 C) evaporator,
90 F (32 C) ambient air
(HCD1000N, HCD1400N
units only)
Rack Systems* EPR
Value – set to
Condensing unit specification/installation notes:
1. HCD1400 model condensing units have a liquid suction
line heat exchanger. The entire liquid line should be
insulated separately from the suction line.
2. Outdoor installation of low side is not recommended and
will void warranty.
* EPR to be supplied by installer
Follett Europe Polska
Mokry Dwór 26C • 83-021 Wislina, Poland
+48 (58) 785-6140 • Fax +48 (58) 785-6159
www.folletteurope.com
HCD1000 HCD1400 HCD1800
7,700 (1940) 10,000 (2520) 13,000 (3275)
0 F (-18 C)
Form# 3815
7