Sw Itching Display For Tuner - Kenwood DPX-4010 Instruction Manual

Alphabet (upper case)/Numerals/Symbols:
A ~ Z 0~ 9 / + – * = < > [ ]
Alphabet (low er case)/Numerals/Symbols:
a ~ z 0~ 9 / + – * = < > [ ]
5
Continue steps 3 and 4 until all the characters are chosen for
the name.
N OTE
You can enter up to 8 characters for each name.
6
Assigning Names
Press the NAM E.S button.
The name of the station is stored in memory, and the Station
Name Preset mode ends.
Also, if you make no input for 10 seconds, the name w ill be
stored up to the point that you have entered, and the mode
ends.
N OTE
• You can assign names to up to 30 FM /AM stations in all.
If you try to enter more than that, the station name stored the
earliest w ill be the first one erased.
• If you w ant to change the name of a station, first display the
name of the station (follow ing steps 1 and 2 above), then
change the letter(s) that you w ant by follow ing steps 3 and 4.
Sw it ching D isplay f or Tuner
You can change the display used w hen listening to the radio.
Changing the Display:
Each time you press the DISP button, the display changes as
follow s:
Station frequency
SNPS name (only w hen being preset)
Character
Clock
— 11 —