Safety Precautions - Kenwood DPX-4010 Instruction Manual

Safety precautions

2WA RN IN G
To prevent injury or fire, take the
follow ing precautions:
• Insert the unit all the w ay in until it is fully
locked in place. Otherw ise it may fall out of
place w hen jolted.
• When extending the ignition, battery, or
ground w ires, make sure to use automotive-
grade w ires or other w ires w ith a 0.75mm
(AWG18) or more to prevent w ire
deterioration and damage to the w ire
coating.
• To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
• If the unit starts to emit smoke or strange
smells, turn off the pow er immediately and
consult your Kenw ood dealer.
• M ake sure not to get your fingers caught
betw een the faceplate and the unit.
• Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it
contains glass parts.
2CA U TION
To prevent damage to the machine,
take the follow ing precautions:
• M ake sure to ground the unit to a negative
12V DC pow er supply.
• Do not open the top or bottom covers of the
unit.
• Do not install the unit in a spot exposed to
2
direct sunlight or excessive heat or humidity.
Also avoid places w ith too much dust or the
possibility of w ater splashing.
• Do not subject the faceplate to excessive
shock, as it is a piece of precision
equipment.
• When replacing a fuse, only use a new one
w ith the prescribed rating. Using a fuse w ith
the w rong rating may cause your unit to
malfunction.
• To prevent a short circuit w hen replacing a
fuse, first disconnect the w iring harness.
• Do not place any object betw een the
faceplate and the unit.
• Do not use your ow n screw s. Use only the
screw s provided. If you use the w rong
screw s, you could damage the unit.
• Do not apply excessive force to the moving
faceplate. Doing so w ill cause damage or
malfunction.
• Do not apply excessive force to the open
faceplate or place objects on it. Doing so w ill
cause damage or breakdow n.
— 4 —
IM PORTANT INFORM ATION
You cannot connect the unit directly to the
follow ing CD automatic changers. If you
w ant to use older changers w ith the unit,
follow the directions below according to the
type of changer you ow n:
• KDC-C200 / KDC-C300 / KDC-C400
Use the extension cable and the control box
attached to the CD changer, and the optional
CA-DS100 converter cord.
• KDC-C301 / KDC-C600 / KDC-C800 / KDC-
C601 / KDC-C401
Use the extension cable attached to the CD
changer, and the optional CA-DS100
converter cord.
• KDC-C100 / KDC-C302 / C205 / C705 /
non-Kenw ood CD changers
Cannot be used w ith this model.
2CA U TION
You can damage both your unit and
the CD changer if you connect them
incorrectly.
M anufactured under license from Dolby
Laboratories.
" Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.