Load A Configuration In The Warp Ui - Barco RLM W Series Reference Manual

12. Warping
Image 12-38
Save configuration
The number of active nodes per row or column are not saved in the file.
12.4.13 Load a configuration in the Warp UI
What is possible ?
Warp configuration files saved in [Projector Toolset install directory]/warping_config-
uration can be loaded in the Warp UI for editing purposes.
How to load a file
1. Right click on the grid (image 12-39)
The context menu opens.
2. Click on Load configuration file.
An Open window opens. The files are normally stored in [Projector Toolset install direc-
tory]/warping_configuration.
3. Browse to the desired file and click on it to select.
4. Click Open to load the file.
132 R59770513 RLM W-SERIES 28/07/2010