Preparation For Playback (Recording); Playback (Recording) Preparation - Kenwood CT Series Instruction Manual

Preparation for playback (recording)

Before playback (recording)
10

Playback (recording) preparation

1
Load a cassette tape in deck A or B.
Deck A:
Playback only. (CT-203/
KXF-W 4010 only)
Playback/recording avail-
able. (CT-2050/KXF-W 6010
only)
2
Select the tape transport direction.
3
Determine the playback (recording) condition.
Downloaded from: http://www.usersmanualguide.com/
1
Set the TIM ER sw itch to OFF.
TIMER
REC OFF PLAY
2
Set the POWER sw itch to ON.
POWER
-ON –OFF
1
Press the eject (0) key.
0
2
Insert a tape and close the cassette holder.
Deck B: Play-
b ac k / r e c o r d i n g
available.
A
1
Press the play (2 or 3) key.
2 7
To play (record)
tape side B.
Feed the tape section w hich cannot be
played or recorded onto in the forw ard
direction.
2
Press the stop (7) key.
2 7
1
Select the playback (recording) mode.
REV.MODE
2
Select the Dolby NR mode.
DOLBY NR
: Keys and control used in the operations described on this page.
÷ Be sure to remove tape slack before insertion.
÷ The type of tape, that is, the Normal, High position or M etal position
(playback only) is selected automatically.
÷ This unit cannot record sound on a M etal tape.
÷ Be sure to close the cassette holder securely by pushing it.
B
Tape transport direction indicators
The 2 and 3 indicators show the direction the tape is transported
during recording or playback. The direction used w hen the tape is
3
last stopped is held in memory even after this unit has been turned
To play (record) OFF, and the tape transport starts in the indicated direction w hen
tape side A.
the unit is started automatically by a timer, etc. To change the tape
transport direction, press the play key for the opposite direction and
immediately press the stop ( 7 ) key.
Deck A direction indicators.
3
Each press sw itches the indication.
1 "[" :Double-side playback (recording) w hich stops tape
2 """ :Playback is endless, but recording stops after having
3 """ :One-w ay playback (recording) w hich stops tape af-
Each press sw itches the indication.
1 DOLBY NR "OFF" (extinguished): Dolby NR is not used.
2 DOLBY NR "B": Noise reduction of the ordinary type.
3 DOLBY NR "C": Noise reduction w ith higher performance.
÷ Select the Dolby NR mode according to the tape recording status.
CT-2 0 5 0 / 2 0 3 / KXF-W 6 0 1 0 / W 4 0 1 0 (En/ M )
Normal position
High position
M etal position (playback only)
stops after having played (or recorded) both sides.
recorded both sides.
ter having played (or recorded) a single side.
TYPE
TYPE
TYPE
Deck B direction indicators.