Preparation For Playback (Recording); Playback (Recording) Preparation - Kenwood CT/KXF-W Instruction Manual

Preparation for playback (recording)

Before playback (recording)
10
1
2

Playback (recording) preparation

1
Load a cassette tape in deck A or B.
1
2
Deck A:
Playback only. (CT-203/
KXF-W4010 only)
Playback/recording avail-
able. (CT-2050/KXF-W6010
only)
2
Select the tape transport direction.
1
To play (record)
tape side B.
2
3
Determine the playback (recording) condition.
1
2
Set the TIMER switch to OFF.
TIMER
REC OFF PLAY
Set the POWER switch to ON.
POWER
-ON –OFF
Press the eject (0) key.
0
Insert a tape and close the cassette holder.
Deck B: Play-
b a c k / r e c o r d i n g
available.
A
Press the play (2 or 3) key.
2 7 3
To play (record)
tape side A.
Feed the tape section which cannot be
played or recorded onto in the forward
direction.
Press the stop (7) key.
2 7 3
Select the playback (recording) mode.
REV.MODE
Select the Dolby NR mode.
DOLBY NR
: Keys and control used in the operations described on this page.
÷ Be sure to remove tape slack before insertion.
÷ The type of tape, that is, the Normal, High position or Metal position
(playback only) is selected automatically.
÷ This unit cannot record sound on a Metal tape.
÷ Be sure to close the cassette holder securely by pushing it.
Normal position
High position
Metal position (playback only)
B
Tape transport direction indicators
The 2 and 3 indicators show the direction the tape is transported
during recording or playback. The direction used when the tape is
last stopped is held in memory even after this unit has been turned
OFF, and the tape transport starts in the indicated direction when
the unit is started automatically by a timer, etc. To change the tape
transport direction, press the play key for the opposite direction and
immediately press the stop (7) key.
Deck A direction indicators.
Each press switches the indication.
1 "[" :Double-side playback (recording) which stops tape
2 """ :Playback is endless, but recording stops after having
3 """ :One-way playback (recording) which stops tape af-
Each press switches the indication.
1 DOLBY NR "OFF" (extinguished): Dolby NR is not used.
2 DOLBY NR "B": Noise reduction of the ordinary type.
3 DOLBY NR "C": Noise reduction with higher performance.
÷ Select the Dolby NR mode according to the tape recording status.
CT-2050/203/KXF-W6010/W4010 (En/M)
Deck B direction indicators.
stops after having played (or recorded) both sides.
recorded both sides.
ter having played (or recorded) a single side.
TYPE
TYPE
TYPE